Gold jewellery repair
Moderator: Moderators
-
- Rank 0
- Posts: 4
- Joined: Mon 23 May 2016 23:23
- Contact:
Gold jewellery repair
I have just been quoted €45 to replace the catch on a fine gold chain -- which is about what I paid for it new, a few decades ago!
Can anyone recommend another jewellery repairer (preferably in Perpignan), whose prices might be a bit more reasonable?
Can anyone recommend another jewellery repairer (preferably in Perpignan), whose prices might be a bit more reasonable?
-
- Rank 4
- Posts: 105
- Joined: Fri 13 May 2016 18:40
- Contact:
-
- Rank 5
- Posts: 1384
- Joined: Tue 01 Sep 2009 21:21
- Contact:
- russell
- Rank 5
- Posts: 1038
- Joined: Fri 21 May 2010 16:03
- Contact:
Easy enough to fit a new catch yourself:
http://www.cooksongold.com/Findings/14c ... channel=uk
Russell
http://www.cooksongold.com/Findings/14c ... channel=uk
Russell
-
- Rank 5
- Posts: 2086
- Joined: Sun 14 Apr 2013 14:37
You obviously know the jargon, and the necessary skills. But it’s entirely unobvious to me how you’d fit it (does it need to be soldered?) or whether it might be the right size (12mm seems quite big for me for a gold chain, unless I were a drug dealer, but what do I know).russell wrote:Easy enough to fit a new catch yourself:
http://www.cooksongold.com/Findings/14c ... channel=uk
Russell
It’s my good fortune (or at least that’s how it seems to me) that I have no idea how much you might pay to repair gold jewellery. But it has taken me 60-odd years to learn that there comes a point when you stop searching for a better price and just cough up.
It’s one of the advantages of the interweb that the bricks-and-mortar shops cannot rip you off as much they previously might have.
-
- Rank 5
- Posts: 1384
- Joined: Tue 01 Sep 2009 21:21
- Contact:
Not quite as it seems, the product shown is not gold at all but rolled gold which is normally used on junk jewellery. From the same supplier, the cheapest gold clasp is about 30€. You then have to add on the cost of gold Solder (about €20) and then have the means and the skill to heat it to 750 deg C. to solder the joint.russell wrote:Easy enough to fit a new catch yourself:
http://www.cooksongold.com/Findings/14c ... channel=uk
Russell
Suddenly €45 looks a bargain.
- russell
- Rank 5
- Posts: 1038
- Joined: Fri 21 May 2010 16:03
- Contact:
There are,of course, various sizes and qualities available. The bigger ones are easier to do up if you have arthritic fingers. What quality did the original quote specify?
They do not need soldering. They come with a jump ring which you just twist to open and then twist back. If you want a really cheap solution you can buy from the far east :
http://www.ebay.co.uk/itm/Wholesale-18K ... RCNBCuLBZQ
I do agree though that €45 seems reasonable when you consider all the overheads involved in running such a business.
Russell
They do not need soldering. They come with a jump ring which you just twist to open and then twist back. If you want a really cheap solution you can buy from the far east :
http://www.ebay.co.uk/itm/Wholesale-18K ... RCNBCuLBZQ
I do agree though that €45 seems reasonable when you consider all the overheads involved in running such a business.
Russell
-
- Rank 5
- Posts: 1384
- Joined: Tue 01 Sep 2009 21:21
- Contact:
Again Russell, you are pointing to something that is not gold, the GF after 18k stands for gold filled which is otherwise known as rolled gold which is brass with a tiny coating of gold.russell wrote:There are,of course, various sizes and qualities available. The bigger ones are easier to do up if you have arthritic fingers. What quality did the original quote specify?
They do not need soldering. They come with a jump ring which you just twist to open and then twist back. If you want a really cheap solution you can buy from the far east :
http://www.ebay.co.uk/itm/Wholesale-18K ... RCNBCuLBZQ
I do agree though that €45 seems reasonable when you consider all the overheads involved in running such a business.
Russell
- russell
- Rank 5
- Posts: 1038
- Joined: Fri 21 May 2010 16:03
- Contact:
Agreed Allan, but my point was that it's difficult to know exactly what you are getting. All jewelers buy in mass produced findings from wholesalers. Cooksons are an old established firm and their range is similar to other wholesalers. If you buy from the far east via Ebay you take pot luck.Allan wrote: Again Russell, you are pointing to something that is not gold, the GF after 18k stands for gold filled which is otherwise known as rolled gold which is brass with a tiny coating of gold.
Legally "gold filled" has to be at least 5% gold while "gold plated" can be as little as 1 micron.
I would point out that brass is much stronger than gold so a gold plated or gold filled catch will be more durable than a gold one.
Russell